首页 > 推广型号列表 > SP206CP-L

SP206CP-L

SP206CP-L资料
	SP206CP-L PDF Download

File Size : 116 KB Manufacturer:Sipex Description:Monitor sense/programmable output 1. The operation of this pin depends on whether the I2C interface is enabled or disabled. This pin has an open-drain output and is only 3.3-V tolerant. An external 5-kΩ pullup resistor connected to VDD is required on this pin. When I2C is disabled (ISEL = low), a low level indicates a powered on receiver is detected at the differential outputs. A high level indicates a powered-on receiver is not detected. This function is valid only in dc-coupled systems. When I2C is enabled (ISEL = high), this output is programmable through the I2C interface (see the I2C register descriptions). Power down (active low). In the power-down state only the digital I/O buffers and I2C interface remain active. When I2C is disabled (ISEL = low), a high level selects the normal operating mode. A low level selects the power-down mode. When I2C is enabled (ISEL = high), the power-down state is selected through I2C. In this configuration, the PD pin should be tied to GND. Note: The default register value for PD is low, so the device is in power-down mode when I2C is first enabled or after an I2C RESET.

	1PCS	100PCS	1K	10K
价格


型号：SP206CP-L 厂家：Sipex 封装：DIP24 批号：527 数量：900 说明：QQ：104735486 611606076


运费：运费到付10.00元（快递）20.00元（顺风）所在地：深圳新旧程度：