首页 > 推广型号列表 > SN74CBTD3306PWRG4

SN74CBTD3306PWRG4

SN74CBTD3306PWRG4资料
	SN74CBTD3306PWRG4 PDF Download

File Size : 116 KB Manufacturer:BB Description:I2C interface select / I2C RESET (active low, asynchronous). If ISEL is high, then the I2C interface is active. Default values for the I2C registers can be found in the I2C register descriptions section. If ISEL is low, then I2C is disabled and the chip configuration is specified by the configuration pins (BSEL, DSEL, EDGE, VREF) and state pin (PD). If ISEL is brought low and then back high, the I2C state machine is reset. The register values are changed to their default values and are not preserved from before the reset. Monitor sense / programmable output 1. The operation of this pin depends on whether the I2C interface is enabled or disabled. This pin has an open-drain output and is only 3.3-V tolerant. An external 5-kΩ pullup resistor connected to VDD is required on this pin. When I2C is disabled (ISEL = low), a high level indicates a powered-on receiver is detected at the differential outputs. A low level indicates a powered-on receiver is not detected. This function is valid only in dc-coupled systems. When I2C is enabled (ISEL = high), this output is programmable through the I2C interface (see the I2C register descriptions).

	1PCS	100PCS	1K	10K
价格


型号：SN74CBTD3306PWRG4 厂家：BB 封装：SSOP16 批号：07+G4 数量：1861 说明：QQ：104735486 611606076


运费：运费到付10.00元（快递）20.00元（顺风）所在地：深圳新旧程度：