首页 > 推广型号列表 > MAX150BEPP

MAX150BEPP

MAX150BEPP资料
	MAX150BEPP PDF Download

File Size : 116 KB Manufacturer:MAXIM Description:Notes: 1. Minimum DC input is C0.3V. During transitions, the inputs may undershoot to C2.0V for periods less than 20 ns. 2. The Voltage on any input or I/O pin cannot exceed the power pin during power-up. 3. Typical values are for TA = 25C and VCC = 5V. 4. Not more than one output should be tested at a time. Duration of the short circuit should not be more than one second. VOUT = 0.5V has been chosen to avoid test problems caused by tester ground degradation. 5. Guaranteed but not 100% tested. 6. Measured with device programmed as a 16-bit counter in each LAB. This parameter is tested periodically by sampling production material. 7. Part (a) in AC Test Load and Waveforms is used for all parameters except tER and tXZ, which is used for part (b) in AC Test Load and Waveforms. All external timing parameters are measured referenced to external pins of the device.

	1PCS	100PCS	1K	10K
价格


型号：MAX150BEPP 厂家：MAXIM 封装：DIP20 批号：07+ 数量：220 说明：QQ：104735486 611606076


运费：运费到付10.00元（快递）20.00元（顺风）所在地：深圳新旧程度：