![]() |
|||||||
|
|||||||
![]() |
LT1993IUD-10资料 | |
![]() |
LT1993IUD-10 PDF Download |
File Size : 116 KB
Manufacturer:LINEAR Description:Control information and data are written into or read-back from COMBO II via the serial control port consisting of the control clock CCLK, the serial data input/output CI/O, (or separate input, CI, and output, CO, on the TP3070 only), and the Chip Select input, CS. All control instructions require 2 bytes, as listed in Table 1, with the exception of a single byte power-up/down command. The byte 1 bits are used as fol- lows: bit 7 specifies power up or power down; bits 6, 5, 4 and 3 specify the register address; bit 2 specifies whether the in- struction is read or write; bit 1 specifies a one or two byte in- struction; and bit 0 is not used. To shift control data into COMBO II, CCLK must be pulsed 8 times while CS is low. Data on the CI/O (or CI) input is shifted into the serial input register on the falling edge of each CCLK pulse. After all data is shifted in, the contents of the input shift register are decoded, and may indicate that a 2nd byte of control data will follow. This second byte may ei- ther be defined by a second byte-wide CS pulse or may fol- low the first contiguously, i.e. it is not mandatory for CS to re- turn high between the first and second control bytes. At the end of CCLK8 in the 2nd control byte the data is loaded into the appropriate programmable register. CS may remain low continuously when programming successive registers, if de- sired. However, CS should be set high when no data trans- fers are in progress. To readback Interface Latch data or status information from COMBO II, the first byte of the appropriate instruction is |
相关型号 | |
◆ MF2410F1.000TM | |
◆ MF2410F2.000TM | |
◆ 0805-125 1.25A 6V | |
◆ 0805-110 1.1A 6V | |
◆ 0805-100 1A 6V | |
◆ 0805-075 750MA 6V | |
◆ 0805-050 500MA 6V | |
◆ 0805-035 350MA 6V | |
◆ 0805-020 200MA 9V | |
◆ 0805-010 100MA 15V |
1PCS | 100PCS | 1K | 10K | ||
价 格 | |||||
型 号:LT1993IUD-10 厂 家:LINEAR 封 装:QFN 批 号:05+ 数 量:821 说 明:QQ:104735486 611606076 |
|||||
运 费:运费到付10.00元(快递)20.00元(顺风) 所在地:深圳 新旧程度: |
|||||
联系人:欧阳先生 |
电 话:0755-83295252,83294949,82565501,82565401 |
手 机: |
QQ:104735486 |
MSN: |
传 真:0755-82565401 |
EMail:oyzf8888@qq.com |
公司地址: 深圳市福田区华强北新亚洲电子商城一期五楼526房间 |
订购须知: 由于电子行情瞬息万变,请在订购前询问清楚,跟本公司业务员确认好价格,货物情况后再下单。 以免出现不必要误会。 【售后服务】:属于产品质量问题,其余在不拆包装不上锡情况下可包退换!如有其他问题需退换,请在一周内联系我司。
我们的产品还在不断更新中!产品繁多,未能尽列,如买家找不到的元件可以与我们联系。欢迎您的咨询!
|