首页 > 推广型号列表 > 2BL5-0002

2BL5-0002

2BL5-0002资料
	2BL5-0002 PDF Download

File Size : 116 KB Manufacturer: Description:Description Power Switch. Connects the drain of the internal high voltage N-channel MOSFET to the Inductor and Schottky Diode to generate the LED boost voltage. This voltage is determined by the total forward bias voltage of the LED series string and the Isense resistor value. (Note: Both pins must be connected.) Analog Ground (Note: Must be connected to a low noise ground source.) Switch Ground (Note: Must be connected to a high current ground source.) Input supply pin. Input range from 1.1 to 5.5 volts. Must be bypassed with a low ESR capacitor to GND. Over Voltage Detect input. Compares the LED boots voltage to the internal voltage reference. If the boost voltage rises above 22V the OVD circuit disables the oscillator and N-channel MOSFET until the boost voltage falls below 18.5V. Must be bypassed with a low ESR capacitor to GND. Shutdown and Intensity Control Input. A control voltage above 260mV enables device operation. A control voltage below 100mV disables device operation. LED intensity is linearly adjusted with voltages between 260mV and VDD. Current Sense Input. The LED bias current is set by connecting a carbon composite or monolithic resistor from this input to Ground. ISENSE regulates this current to 1/13 of the CTRL input voltage.

	1PCS	100PCS	1K	10K
价格


型号：2BL5-0002 厂家：封装：BGA 批号：05+ 数量：582 说明：现货库存,特价热卖


运费：运费到付10.00元（快递）20.00元（顺风）所在地：深圳新旧程度：